Atria LED Alabaster Table Lamp - Brushed Brass

The Atria is a 450mm alabaster table lamp built around a tapered brushed brass frame holding a single panel of natural Spanish alabaster. The panel is cut to a tapered geometric profile at the top and finished with an organic, dripped edge along the lower break, leaving the bottom half of the frame open. An integrated 5W LED runs at 3000K behind the stone, lighting the alabaster from within rather than from a visible bulb.

At 450mm tall and 230mm wide, the Atria suits bedside tables, console tables, sideboards and desk corners where a sculptural light source is wanted alongside, rather than instead of, a primary lamp. The 5W output is closer to accent and ambient brightness than task lighting, so it works best as a secondary layer in a room already lit by overhead or floor lamps. The weighted base sits flat on standard furniture surfaces and runs from a 230V mains supply.

The alabaster panel is cut from natural Spanish stone, so the veining, translucency and tonal variation differ from piece to piece and become more visible once the LED is switched on. The brushed brass frame holds the stone on three sides and continues down past the panel to form an open trapezoidal base, giving the lamp the look of a framed sculpture as much as a functional fitting. The brushed finish keeps reflections soft and pairs comfortably with warm woods, neutral palettes and other brass accents.

Instruction Manual

Is the Atria bright enough to read by?

The integrated LED is rated at 5W, which puts the Atria firmly in the accent and ambient lighting bracket rather than task lighting. It works well as a bedside glow or layered accent on a console, but a dedicated reading lamp would be needed for prolonged reading.

Is the bulb replaceable?

No. The light source is an integrated LED rather than a replaceable bulb. LEDs of this type typically last tens of thousands of hours of normal use. The lamp carries a 2-year warranty.

Does each alabaster panel look the same?

No. Each panel is cut from natural Spanish alabaster, so the veining, translucency and tonal variation differ between individual pieces, and the dripped lower edge will sit slightly differently on each lamp. This is a feature of the natural stone, not a defect.

How is the alabaster cleaned?

Wipe gently with a dry, soft microfibre cloth. Alabaster is porous and softer than marble, so avoid household sprays, polishes and chemical cleaners. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but do not soak the stone.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.