View details
Ceiling Lights
Cadris LED Medium Square Alabaster Flush Ceiling Light - Soft White & Brushed Brass
Description The Cadris is a 500mm square f…
Shipping and project delivery are confirmed at checkout.
Product information
Details & specification
Description
The Cadris is a 500mm square flush ceiling light cut from natural Spanish alabaster, with four exposed brushed brass screw fixings at the corners holding the stone block to its mounting plate. An integrated 3000K LED sits within the 50mm-deep housing and lights the alabaster from inside, so the stone itself becomes the diffuser rather than a bulb being visible behind a shade.
Designed for rooms where a pendant drop is impractical, the Cadris suits low-ceilinged hallways, landings, bedrooms and ensuites with ceiling heights of 2.2-2.6m. The 50mm projection from the ceiling keeps headroom clear under loft conversions and stairwell transitions, while the 500mm square footprint provides enough light spread for a corridor or small-to-medium room without needing a secondary fitting. This directly answers the brief for ceiling lights for low ceilings where flush fittings are required.
Each alabaster slab is cut from a different section of stone, so the veining, cloudiness and tonal variation differ between individual pieces — no two Cadris lights look identical when lit. The brushed brass corner fixings are left visible as a deliberate design feature, contrasting the warm metal against the pale, translucent stone and reinforcing the square geometry. The combination pairs with both contemporary and traditional interiors that lean toward warm neutrals.
Specification
| Material | Brass & Natural Spanish Alabaster |
| Finish | Soft White & Brushed Brass |
| Height | 50mm |
| Diameter | 500mm |
| Lamp Socket | Integrated LED |
| Colour Temperature | 3000K |
| Voltage | 230V |
| Weight | - |
| Warranty | 2 Year |
Frequently Asked
Is the Cadris suitable for low ceilings?
Yes. The Cadris projects only 50mm from the ceiling, making it well-suited to rooms with ceiling heights of 2.2-2.6m, loft conversions, hallways and landings where a pendant drop would be impractical.
Can it be used in a bathroom?
The Cadris does not carry a published IP rating, so it is intended for general indoor use rather than bathroom zones. For bathroom installation, please choose a fitting with a confirmed IP44 or higher rating.
Does the alabaster vary between pieces?
Yes. Each panel is cut from natural Spanish alabaster, so the veining, cloudiness and tonal movement differ between individual pieces. This is a feature of the natural stone, not a defect.
What size room does it suit?
At 500mm square with a 3000K integrated LED, the Cadris works well as primary lighting in hallways, small-to-medium bedrooms and landings up to roughly 9-12m². Larger rooms benefit from pairing two units or supplementing with secondary lighting.
Delivery & Returns
Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.
Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.
To arrange delivery or return support, use our contact page.