Eliora LED Alabaster Wall Light - Brushed Brass

The Eliora is a 600mm linear wall light built around a slim 60mm column of natural Spanish alabaster, framed within a brushed brass surround that wraps around the stone in a continuous rounded-end profile. An integrated 15W LED runs the length of the alabaster, casting warm 3000K light through the stone so the panel itself becomes the light source.

At 120mm wide and 600mm tall, the Eliora is sized to flank doorways, mirrors, headboards and architectural features without dominating the wall. The vertical orientation suits hallways and corridors where pairs or sequences create a rhythmic lighting run, and the soft diffusion makes it well suited to bedrooms and living rooms where directional glare would feel too sharp. A central horizontal brass bar visually divides the alabaster into two stacked sections.

The combination of solid copper body, brushed brass finish and natural alabaster gives the fitting a substantial material presence in a slim footprint. Each alabaster panel shows different mineral veining and tonal variation depending on the section of stone it was cut from, so no two Eliora wall lights look identical when lit. The brushed brass softens reflections under daylight and pairs comfortably with warm-toned interiors as well as cooler grey and off-white schemes.

Is the Eliora suitable for bathrooms?

The Eliora does not carry a published IP rating, so it should be installed in dry interior spaces such as hallways, bedrooms and living rooms. For bathroom zones, choose a wall light with a confirmed IP44 rating or above.

Is it dimmable?

The integrated LED runs at 15W on 230V mains. Dimmer compatibility depends on the specific dimmer model used, so please contact us before pairing with a dimmer to confirm whether your circuit will work cleanly with the driver.

Does the alabaster vary between pieces?

Yes. Each panel is cut from natural Spanish alabaster, so the veining, tonal variation and translucency differ between individual pieces. This is a feature of the natural material rather than a defect, and is most visible once the LED is switched on.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, polishes or chemical cleaners.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.