Vantor 3 Light Alabaster Cluster Chandelier - Soft White & Brushed Brass

The Vantor is a 3-light cluster pendant built around three small alabaster shades suspended at staggered heights from a single 300mm circular ceiling plate finished in brushed brass. Each 100mm shade is cut from natural Spanish alabaster with a soft white tone, and each takes a single E27 bulb (sold separately). The brass cables match the canopy and run cleanly down to brass shade caps that fix to the top of each alabaster form.

The cluster format suits dining tables, kitchen islands, stairwells and high-ceiling entrance halls where a single larger pendant would feel heavy. Hung over a round dining table the three staggered drops sit naturally above the surface and read as a group rather than three separate fittings. In a stairwell the varied drop lengths can be set to follow the stair line, with the lowest shade nearest the upper floor and the highest tucked close to the canopy.

Each alabaster shade carries its own veining pattern and tonal shifts, so the three shades on any individual Vantor will not be identical twins. When lit, the stone glows from within and the natural mineral lines become visible through the surface, casting warm diffused light rather than direct downward beams. The brushed brass canopy and cable hardware give a low-sheen warm metal note that pairs with the cream and honey tones running through the alabaster.

What bulbs does the Vantor take?

The pendant takes three E27 (Edison screw) bulbs, sold separately. Most owners pair this fitting with warm-white LED bulbs in the 2700K-3000K range to complement the cream tones of the alabaster. Keep the wattage modest (around 4-6W LED per shade) so the light reads as ambient glow through the stone rather than as a bright point source.

Are the cable drops adjustable?

Yes. The three brass cables are designed to be set to staggered heights during installation, allowing the cluster to be dressed for the room. Over a dining table the lowest shade typically sits 700-800mm above the surface, with the other two shades stepped up from there.

Will the three shades match?

Each shade is cut from natural Spanish alabaster, so the veining, tonal variation and translucency differ from shade to shade. The three shades within a single Vantor are selected to read as a group but will not be identical. This is a feature of the natural stone, not a defect.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth. Avoid household sprays, polishes and chemical cleaners, and do not use damp cloths repeatedly on the same area as the stone can absorb moisture.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.