Veltrix LED Medium Round Alabaster Flush Ceiling Light - Soft White & Brushed Brass

The Veltrix is a 500mm round flush ceiling light built from natural Spanish alabaster set in a metal frame, with a 50mm overall depth and a brushed brass centre cap. An integrated 48W 3000K LED sits behind the alabaster disc, lighting the stone from inside so the surface itself becomes the diffuser rather than a separate cover panel.

The 50mm depth makes the Veltrix suitable for rooms where a pendant or semi-flush fitting would hang too low — hallways, landings, bedrooms with low or sloped ceilings, and en-suites with restricted headroom. The flat profile keeps the light close to the ceiling plane while the 500mm diameter gives enough surface area to provide ambient light across a 3-4m room. The brushed brass centre cap conceals the fixing point and adds a warm metallic accent against the soft white stone.

Each Veltrix shows different mineral veining and tonal variation across its alabaster panels, since the stone is cut from natural blocks rather than cast or printed. When the LED is on, the veining becomes more visible as light passes through thinner sections of the stone, giving the disc a marbled appearance that no two fittings share. The fluted edge detail around the rim breaks up the silhouette and catches light differently to the flat underside.

Is the Veltrix suitable for low ceilings?

Yes. The total depth is 50mm, which makes it one of the slimmer alabaster fittings available and well-suited to rooms with ceiling heights below 2.4m, sloped ceilings, or loft conversions where a pendant would hang into head height.

What size room does the 500mm diameter suit?

The 48W output and 500mm diameter typically provide ambient light for rooms up to 3-4m across, such as medium hallways, landings, double bedrooms and en-suites. For larger living rooms or kitchens, two fittings or a higher-output alternative would suit better.

Is it dimmable?

The integrated LED runs on 230V mains at 48W. Dimmer compatibility depends on the specific dimmer module — please contact us before pairing with a dimmer to confirm.

Can it be used in a bathroom?

The specification does not list an IP rating, so the Veltrix is intended for general indoor use rather than zoned bathroom areas. It can be installed outside the bathroom zones (for example in the centre of the room ceiling away from shower or bath) where local regulations permit, but check the most recent IET wiring regulations or consult an electrician for your specific layout.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.