Zarelli 8 Light Interlocking Alabaster Linear Chandelier - Brass

The Zarelli is a 1250mm linear chandelier built from a row of rectangular Spanish alabaster panels suspended on a brushed brass frame. The panels interlock along their upper and lower edges to form a continuous illuminated band, with eight E14 lamp sockets concealed behind the stone. Two slender vertical rods drop from a rectangular brass canopy, holding the fitting in clean horizontal alignment.

Designed for kitchen islands, long dining tables and hallway runs, the chandelier suits ceiling heights of 2.6m or above and benches or tables of 1.4m or longer. The 1250mm length gives even light coverage along an island worktop, and the 630mm overall height allows the rods to be shortened during installation to set the panels around 750-850mm above the surface. Eight E14 candle bulbs (sold separately) provide flexibility to choose warm-white LEDs for ambient dining light or higher-output filament lamps for brighter task use.

Each alabaster panel is cut from solid natural stone, so the veining, mineral inclusions and tonal variation differ from panel to panel and from one chandelier to the next. The honed surface keeps the stone matt rather than polished, allowing the internal structure of the alabaster to read clearly when the lamps are lit. The stepped profile across the top and bottom edges creates depth and shadow at close range, while the overall outline reads as a clean horizontal band from across a room. The brass finish on the frame and rods warms the cooler tones in the stone and pairs well with both timber and stone worktops.

What bulbs does the Zarelli take?

The chandelier uses eight E14 (small Edison screw) candle bulbs, sold separately. Most users pair it with warm-white 2700K-3000K LED candle bulbs at 4-6W each for dining and island lighting.

What length table or island does it suit?

At 1250mm long, the Zarelli works well over kitchen islands and dining tables of 1.4m or longer. For shorter surfaces the chandelier may overhang the ends; for longer runs of 2m or more, two units in line are a common solution.

Can the drop be adjusted?

Yes. The two vertical brass rods can be shortened on installation to set the panels at the height required above your worktop or table, typically 750-850mm above the surface. The overall maximum height from canopy to base is 630mm.

Will the alabaster panels look identical to the photograph?

The overall form, dimensions and finish match the photograph, but the veining, tonal variation and mineral inclusions in each panel are unique to the section of natural Spanish alabaster they were cut from. No two Zarelli chandeliers share identical stone patterns.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACE361 promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.